Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
Search in posts
Search in pages
Filter by Categories
Case Report
Clinical research study
Current Issue
Editorial Board
Literature Review
Narrative review
Original Article
Research Article
Review Article
Short Report
Surgical techniques
Systematic Review and Meta-Analysis
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
Search in posts
Search in pages
Filter by Categories
Case Report
Clinical research study
Current Issue
Editorial Board
Literature Review
Narrative review
Original Article
Research Article
Review Article
Short Report
Surgical techniques
Systematic Review and Meta-Analysis
View/Download PDF
70 (); 173-182
doi:
10.1016/j.jor.2025.05.058

Translate:

Mechanical stimulation in 2D: A potent accelerator of matrix mineralization in ATDC5 chondrogenic cells

Author affiliations
Université de technologie de Compiègne, CNRS, Biomechanics and Bioengineering, Centre de Recherche Royallieu, CS 60 319 - 60 203, Compiègne Cedex, France
Numerical Methods and Modeling Research Group (GNUM), Universidad Nacional de Colombia, Colombia
Article History
Corresponding author(s)

⁎Corresponding author: Olfa Trabelsi. olfa.trabelsi@utc.fr

Article tools · PDF & citations

Abstract

Abstract

Matrix mineralization is a key process in endochondral ossification and cartilage maturation. While optimized biochemical protocols using ATDC5 chondrogenic cells have shortened mineralization timelines, the role of mechanical stimulation in enhancing this process remains underexplored. This study investigates whether dynamic mechanical stimulation in 2D monolayer cultures can accelerate mineralization and influence extracellular matrix (ECM) composition.

ATDC5 cells were cultured on PDMS membranes coated with collagen and subjected to cyclic tensile strain (12 % at 0.05 Hz for 1 h/day) using a uniaxial bioreactor over 5 days. The culture protocol included supplementation with β-glycerophosphate and ascorbic acid. Mineralization and ECM production were assessed at days 7, 17, and 23 using Alizarin Red and Alcian Blue staining. SEM/EDX confirmed calcium-phosphate deposition. A phenomenological finite element model was developed to correlate mechanical stimuli with hypertrophy using the osteogenic index.

Mechanical stimulation led to a 32 % increase in Alizarin Red staining compared to controls (P < 0.001), indicating faster mineralization. GAG production was reduced under mechanical loading (P < 0.05), consistent with early mineralization. SEM/EDX confirmed more uniform mineral deposition in stimulated samples. Morphologically, stimulated cells aligned along the loading axis and displayed a nearly 10-fold increase in hypertrophic cell area. The numerical model showed elevated osteogenic index values and stress peaks in the chondrocyte membrane under mechanical loading.

Dynamic tensile stimulation in 2D culture significantly accelerates ECM mineralization in ATDC5 cells. This effect appears to be mediated through enhanced chondrocyte hypertrophy and alignment of ECM components. The combined use of mechanical and biochemical cues provides a promising strategy for optimizing in vitro models of endochondral ossification and developing tissue engineering therapies.

Keywords

  • Endochondral ossification
  • Cartilage
  • ATDC5 cells
  • Mechanical stimulation
Disclaimer:
This article was originally published by Reed Elsevier India Pvt. Ltd. and was migrated to Scientific Scholar after the change of Publisher.
1

1 Introduction

Mechanical stimulation plays a crucial role in the development and function of chondrocytes, particularly in endochondral ossification, a process essential for early skeletal development. This area of research is pivotal in tissue engineering, offering insights into therapies for pathologies affecting growth plate cartilage.1 Also, researchers have sought to replicate various aspects of endochondral ossification in vitro, such as hypertrophy,2 mineralization rates,3 interstitial growth, and the formation of ossification centers.4

Traditional mineralization methods often require extended culture times (up to 34 days) and modifications to culture conditions, including changes in CO2 levels, to achieve differentiation and mineralization. Since2 introduced a method for ATDC5 cell differentiation and mineralization, subsequent studies have refined culture medium supplements, for instance by adding ascorbic acid to shorten the proliferation phase and inorganic phosphate to enhance differentiation.5 emphasized the biphasic and maturation-dependent regulation of chondrogenesis by phosphate in ATDC5 cells. Their research highlighted how temporal phosphate delivery in 3D cultures could rapidly model the effects of exogenous cues on chondrogenic differentiation, chondrocyte maturation, and matrix mineralization, providing a solid framework for mechanistic studies.

However, the combined effects of mechanical stimulation and optimized culture protocols on the mineralization rate of ATDC5 chondrogenic cells remain unexplored. For this reason, the use of β-glycerophosphate (βGP) and ascorbic acid, as proposed by,6 in conjunction with mechanical stimulation, is investigated to see whether these represent an enhancement in mineralization and proteoglycan production.

Recent studies investigated the role of mechanical stimulation in ATDC5 cells. For example,7 highlighted that ATDC5 cells exhibit pronounced calcium signaling responses under mechanical stimulation, mediated by extracellular calcium sources, intracellular ER calcium stores, and mechanosensitive ion channels, particularly the TRPV4 channel. Other mechanisms in which primary cilia, ion channels and integrins interact and activate pathways that regulate chondrocyte activity are discussed in.8 Notably, lithium chloride-induced primary cilia recovery was shown to enhance the biosynthetic response of chondrocytes to mechanical stimulation, which is critical for cartilage tissue engineering.9 Furthermore, mechanical stimulation has been linked to changes in metabolomic profiles of chondrocytes, influencing inflammatory pathways, lipid metabolism, and energy metabolism.10

Mechanical forces have been shown to influence chondrogenic pathways significantly.11 demonstrated that hydrostatic stress promotes the maintenance of the cartilage phenotype, while octahedral shear stress encourages ossification. Following this principle, they proposed an osteogenic index (OI) which correlates its magnitude to cartilage or bone formation. It has been shown that mechanical stimulation also plays a protective role against chondrocyte pyroptosis by suppressing the PI3K/Akt/NF-κB signaling pathway in osteoarthritis, reducing inflammation and cell death. Additionally, the regulation of HIF-1α under hypoxic conditions in response to mechanical stimulation has been found crucial for maintaining cartilage homeostasis.12 Other authors have found that the development of the pericellular matrix around human chondrocytes is significantly influenced by mechanical stimulation.13 Research on various mechanical stimulation regimes has provided insights into strategies for promoting chondrocyte growth and proliferation,14 in addition to the interaction of chondrocytes with the ECM for rehabilitation purposes15,16 reviews the role of mechanical stimulation in growth plate chondrocytes, emphasizing the limitations of traditional macroscopic mechanical stimulators, which have tested only a narrow range of stress conditions and failed to fully capture the mechanobiology at the single-cell level. The authors propose microfluidic devices as a promising alternative, allowing for the simultaneous application of varied stress conditions and real-time observation of cellular behavior. Particularly, at the cell scale, compressive forces generally suppress chondrocyte proliferation and hypertrophy, while tensile stresses, particularly dynamic tension, can promote anabolic activity and bone growth. However, excessive mechanical stimulation can negatively affect chondrocyte viability and growth plate structure. Key studies on 2D chondrocyte stimulation include,17 which used 2D cell stretchers to explore tensile stress effects on chondrocyte metabolism, and,18 which applied 2D stretching to investigate collagen production and differentiation markers in growth plate chondrocytes. In addition to 2D environments,19 cultured chondrocytes in agarose and subjected them to dynamic compression, providing insights on different genes activity depending on mechanical stimuli at the transcriptional level, showing how the dynamic compressive load can affect procollagen type II.

In this study, we investigate the impact of 2D dynamic tensile strain on ECM mineralization and chondrocyte hypertrophy, in addition to a supplementation regime that accelerates mineralization times. By integrating experimental findings with phenomenological modeling, we test the hypothesis that mechanical stimulation enhances mineralization by promoting chondrocyte hypertrophy and other mechanisms that facilitate the apparition of nucleation sites for aggregates of calcium-phosphate.

2

2 Methods

In order to assess the effect of the dynamic loading on the ATDC5 cells mineralization in addition to an optimized culture regime for enhanced mineralization, a 2D stimulation scheme was planned out. Furthermore, a finite element model was developed to analyze the hypertrophy and mineralization rate, using a single cell model, depending on cell stimulation.

Glass slides were cleaned with ethanol, then activated by exposition to an oxygen plasma (300 mTorr, 1 min, Harrick Scientific). Then, slides were chemically functionalized by placing them in a closed container at room temperature (25 °C) alongside silica gel beads as a desiccant and 15 μL of trichloro(1H,1H,2H,2H-perfluorooctyl)silane (Sigma Aldrich) for 3 h. Subsequently, Polydimethylsiloxane (PDMS) membranes were produced by spin-coating an even layer of Sylgard 184 (Dow Corning) in a 10:1 polymer to curing agent ratio onto the prepared slides (SCS P6700 spin-coater). To achieve a membrane thickness of approximately 100 μm, the spin-coating parameters, seen in Table 1, were set to 3 s acceleration, 42 s at 1000 rpm, followed by a 3 s deceleration. After spin-coating, membranes were cured in an oven at 68 °C for 6 h to complete the polymerization. Membrane thickness was verified using optical profilometry (Bruker Contour GT), A typical profile is shown in Fig. 1(a) and measurements for two spinning speeds in Fig. 1(b).

Table 1 Spin coating parameters for 100 μm thickness.
Step RPM Ramp (s) Time (s)
1 1000 3 1
2 1000 1 42
3 1000 3 1
4 – 1 –
a) Thickness measurement using profilometry analysis. b) PDMS membrane thickness vs RPM.
Fig. 1 a) Thickness measurement using profilometry analysis. b) PDMS membrane thickness vs RPM.

Once the PDMS membranes have been prepared by cutting them according to the dimensions of the sample to be tested in the traction machine, cleaned with 70 % ethanol for at least 30 min, we proceed to dry for 30 min at room temperature. The surfaces were subsequently treated with plasma to increase their hydrophilicity. Finally, the membranes were exposed to UV light, which mainly ensured sterilization For the collagen coating on PDMS membranes, a concentration of 0.1 mg/ml was used, which was prepared from a stock solution of 3.43 mg/ml. The collagen was dissolved in a 20 mM acetic acid solution. Shortly after activating the surface with plasma, the solution is applied over the membrane surface for 1 h at room temperature. Then, 3 washes in PBS are performed and the membranes are left in an incubator overnight submerged in PBS. It is recommended to seed the cells on the side of the membranes where no silane treatment was done, since this may affect cell adhesion.

2.1

2.1 Mechanical stimulation

The stimulation regime was chosen following a review on mechanical stimulation regimes,20 and identifying how low frequencies decrease proteoglycan synthesis which is associated with the onset of mineralization.21,22 After identifying these parameters, a dynamic regime of 12 % strain 0.05Hz 1 h each 24 h during 5 days.The distance between clamps was set to 29 mm in the uniaxial traction system MechanoCulture T6 bioreactor, Cellscale, the regime and the setup used can be seen in Fig. 2.

Timeline of dynamic stimulation regime on PDMS membrane with collagen coating.
Fig. 2 Timeline of dynamic stimulation regime on PDMS membrane with collagen coating.
2.2

2.2 Cell culture

The cell line was purchased from Sigma-Aldrich Co., and the culturing media scheme for the ATDC5 cells was taken from,3 this consisted of maintaining a culturing scheme with an initial density of 10 000 cells/cm2 as starting point, until they reached confluency (6 days). The culture medium consisted of DMEM/F-12 (1:1) with GlutaMAX I(Gibco), supplemented with 5 % FBS (FBS), 1 % insulin-transferrin-selenium, 1 % sodium pyruvate (Gibco), and 0.5 % penicillin (Fisher Scientific). After five days of stimulation, the cells were exposed to a differentiation medium containing 10 mM β-glycerophosphate (βGP, Merck) and 50 μg/ml L-ascorbate-2-phosphate (ascorbic acid, Sigma Aldrich). The experimental design included triplicates for each time point and as shown in Fig. 3.

a) Triplicate experimental design. b)Cell culture at 7 days showing hypertrophy in some cells. c) Cell culture at 17 days showing hypertrophic cells. d)Cell culture at day 23 showing signs of mineralization.
Fig. 3 a) Triplicate experimental design. b)Cell culture at 7 days showing hypertrophy in some cells. c) Cell culture at 17 days showing hypertrophic cells. d)Cell culture at day 23 showing signs of mineralization.
2.3

2.3 Histochemical staining

To assess mineralization at each time point, Alizarin Red staining was performed as described by.23 Cells were fixed with 4 % paraformaldehyde, washed three times with deionized water (ddH2O) for both stainings, for Alizarin red they were incubated with 2 % Alizarin Red solution for 30 min at 37 °C. For evaluating proteoglycan production in the extracellular matrix (ECM), Alcian Blue staining was employed, using 0.1 % Alcian Blue 8 GS in 0.1M HCl at 37 °C overnight. Staining quantification for Alizarin Red and Alcian Blue was carried out by analyzing images acquired with an inverted phase-contrast microscope (LEICA) using ImageJ software (version 2.14.0; NIH, Bethesda, MD, USA), specifically measuring the intensity and stained area, in same lighting conditions, as seen in Fig. 4, in each sample, a region of interest (ROI) measuring 1500 μm by 1000 μm was selected. Results were reported for days 7, 17 and 23 (see Fig. 5).

Quantification of Alizarin Red staining in monolayer cultures of ATDC5 cells, expressed as the percentage of stained area.
Fig. 4 Quantification of Alizarin Red staining in monolayer cultures of ATDC5 cells, expressed as the percentage of stained area.
a)Cartilage nodule formation (shown by white arrows), with physiological mineralization at day 23(shown by the black arrow), control demonstrates localized nucleation sites of mineralization, the stimulated sample shows no nucleation sites.
Fig. 5 a)Cartilage nodule formation (shown by white arrows), with physiological mineralization at day 23(shown by the black arrow), control demonstrates localized nucleation sites of mineralization, the stimulated sample shows no nucleation sites.
2.4

2.4 Scanning electron microscopy and energy dispersive X-ray analysis

To prepare the samples for scanning electron microscope (SEM) analysis (Quanta 250 FEG microscope, Philips), each membrane containing fixed cells was subjected to a dehydration process at each time point. After three washes with double-distilled water (ddH2O), the cells were immersed in 70 % ethanol for 30 min at room temperature, followed by sequential dehydration in 96 % ethanol for another 30 min and then in 100 % ethanol for an additional 30 min. Finally, ethanol was removed, and samples were left to dry overnight. Prior to EDX analysis, the dried samples were sputter-coated with platinum.

2.5

2.5 Model description

The exploratory finite element model consists in a single cell, linear elastic isotropic model that accounts for the chondrocyte hypertrophy in response to a tensile strain stimulus. The elastic problem is first defined by Eq. (1), which establishes the equilibrium between the divergence of the stress field σ, and the body forces (b). Secondly, the hydrostatic stress P is calculated as the average of the stress tensor shown in Eq. (2). For the octahedral shear stress S the first and second invariants I1 and I2 are used as seen in Eq. (3). These two quantities are used to define the osteogenic index OI as defined by.11Eq. 1∇·Tσ + b = 0Eq. 2P=13(σ1+σ2+σ3)Eq. 3S=132I12−6I2Eq. 4OI=S+kOIP

The OI is used in this context to impose a strain rate tensor which follows a linear relationship with the OI which is added to account for the growth due to chondrocyte hypertrophy as seen in Eq. (4). The linear relationship between the strain tensor rate ε˙ (Eq. (7)) and OI as seen in Eq. (5), has been previously explored by24 which is useful to account for longitudinal growth, furthermore at a cell scale, different mechanosensors regulate chondrocyte activity under the influence of volumetric and deviatoric stresses.8 In particular, our model is based on a fitting of the growth rate measured in the hypertrophic chondrocytes found experimentally (three-fold, according to the monolayer cultures), for both control and stimulation cases in-vitro. The properties domain can be seen in Table 2.Eq. 5ε˙=dHypertr=k2OIEq. 6∇=[∂∂x100∂∂x2∂∂x2∂∂x1]Eq. 7ε˙=[ε˙11ε˙22γ12]

Table 2 Material properties.
Zone Elastic modulus (MPa) Poisson ratio Reference
Chondrocyte 0.002 0.499 25
Pericellular matrix 0.26 0.499 26
Extracellular matrix 0.38 0.499 26
2.6

2.6 Statistics

The data was analyzed using an independent two-sample t-test to compare the control and mechanically stimulated groups at different time points. The analysis was conducted using Python (SciPy library). For both the mineralization assay and Alcian Blue staining experiments, means and standard deviations were calculated. A p-value was obtained to assess statistical significance, with P < 0.05 considered statistically significant.

3

3 Results

Light microscopy images collected throughout the experiment time course indicated successful differentiation of the ATDC5 cell line. Cells reached confluency after 6 days, with no significant formation of cartilage nodules or distinct extracellular matrix (ECM) features at this stage. On the other hand, the mechanical stimulated samples showed an increase in the quantification of Alizarin red, compared with the control samples, as seen in Fig. 7. Quantitative analysis of the staining indicated a positive correlation between mechanical stimulation and the percentage of Alizarin Red staining (P < 0.001), suggesting accelerated time of mineralization due to mechanical forces, as seen in Fig. 7(a). On the other hand, there seems to be a negative correlation between the mechanical stimulation and the GAGs production (P < 0.05) as seen in Fig. 6(b).

a) SEM analysis with distinct calcium phosphate aggregates, indicated by red-stained regions, within the stimulated samples, confirming uniform mineralization throughout the specimen with reduced nucleation points. b) EDX spectra illustrating mineralization, marked by a red square. c) Uniform distribution of calcium phosphate aggregates observed throughout the stimulated samples. d) Control samples show limited mineralization, nonetheless small regions of high density agregates is shown, a single nucleation spot is indicated.
Fig. 6 a) SEM analysis with distinct calcium phosphate aggregates, indicated by red-stained regions, within the stimulated samples, confirming uniform mineralization throughout the specimen with reduced nucleation points. b) EDX spectra illustrating mineralization, marked by a red square. c) Uniform distribution of calcium phosphate aggregates observed throughout the stimulated samples. d) Control samples show limited mineralization, nonetheless small regions of high density agregates is shown, a single nucleation spot is indicated.
Effect of mechanical stimulation on the time evolution of mineralization and GAG production.
Fig. 7 Effect of mechanical stimulation on the time evolution of mineralization and GAG production.
(a) Ellipse fitting shows cell alignment with axial loading.(b) Boundary conditions and region of interest for orientation analysis (0.089 mm2), selected where stress distribution is uniform. (c) Fitted ellipses generated using ImageJ. (d) Chondrocyte hypertrophy, illustrating an almost tenfold increase in cell size, for a stimulated sample.
Fig. 8 (a) Ellipse fitting shows cell alignment with axial loading.(b) Boundary conditions and region of interest for orientation analysis (0.089 mm2), selected where stress distribution is uniform. (c) Fitted ellipses generated using ImageJ. (d) Chondrocyte hypertrophy, illustrating an almost tenfold increase in cell size, for a stimulated sample.

In addition to assessing mineralization, ECM orientation was examined using phase contrast microscopy, as shown in Fig. 8(a)–(c). The results reveal a clear alignment of the cell axis with the direction of applied strain. In control samples, the ECM exhibited a random orientation. In contrast, stimulated membranes demonstrated a distinct alignment of collagen fibers from both the substrate and ECM along the direction of mechanical stress. This effect was particularly evident in the central regions, where stress distribution was more uniform, aligning with Saint-Venant's principle.

ATDC5 cells progressed through distinct differentiation stages under both control and stimulated conditions, accompanied by a notable increase in ECM production and calcium phosphate deposition. Media supplementation led to a marked decrease in cell proliferation, a hallmark of chondrocyte differentiation, furthermore some cells exhibited hypertrophy as seen in Fig. 8(d), showing an area of 22700 μm2, an almost 10 times fold increase in area compared to other chondrocytes. By the end of the experiment, cells extended beyond the PDMS membrane boundaries, suggesting proliferation and cellular migration (In a much lower degree compared to the chondrogenic state). Additionally, the formation of cartilaginous nodules further confirmed the shift toward a differentiated phenotype, indicating a progression toward hypertrophic maturation.

To confirm that indeed mineralization was taking place at day 23, in addition to the staining, SEM and EDX were used to identify aggregates and peaks of calcium and phosphate. SEM analysis of samples stained with Alizarin Red revealed distinct percentages of calcium and phosphate aggregates in both control and stimulated samples, as shown in Fig. 6(a) where aggregates of Alizarin red can be seen in the stimulated sample. In Fig. 6(c), a nucleation site has been sampled by SEM, showing a more concentrated area of calcium and phosphate aggregates. Is important to note, that although clear mineralization spots can be found on the control samples, the overall area of staining is higher on the samples subjected to cyclic tensile strain. As shown in Fig. 6(b) a high presence of silicon is picked from the background due to the composition of PDMS, but some markers of mineralization such as phosphorus and calcium are also present, other markers such as sodium, sulfur, and chlorine may be due to the alizarin staining and PDMS background.

According to the finite element model proposed, the osteogenic index in the membrane of the chondrocyte is higher, with peaks both in hydrostatic and octahedral shear stress, showing a region of special interest due to stresses caused by the mechanical stimulation and chondrocyte's growth which induces stresses in the interface between the pericellular matrix and the chondrocyte, this can be seen in Fig. 9.

a) Single cell, quarter symmetry simulation.b) Domain showing increased ostegenic index in the chondrocyte membrane c) Octahedral shear and hydrostatic stress peaks along a diagonal line (shown in white in (b)).
Fig. 9 a) Single cell, quarter symmetry simulation.b) Domain showing increased ostegenic index in the chondrocyte membrane c) Octahedral shear and hydrostatic stress peaks along a diagonal line (shown in white in (b)).
4

4 Discussion

This work suggests a significant interplay between mechanical stimulation and the process of matrix mineralization in ATDC5 chondrogenic cells, the data presented provides a new, enhanced method to achieve physiological chondrocyte mineralization in as much as 23 days. As observed, there appears to be a positive correlation between mechanical strain and mineralization, supporting the hypothesis that mechanical stimulation may enhance the cleavage of matrix vesicles, which are crucial in the mineralization process.12,13 Particularly we noted that the highest shear and hydrostatic stresses can be found in the membrane, suggesting a clear effect on the different locations where the matrix vesicles might bud off, it has been previously shown that shear stress might induce exocytosis processes.27 Also, there could be an effect of chondrocyte burst as stated by,28 where this event could give space to mineral expansion and also release membrane nanofragments that serve as nucleator sites for mineralization to occur. This observation aligns with previous research indicating the pivotal role of mechanical forces in regulating cellular activities, particularly in chondrocytes14,16 influencing the mechanobiology of the cartilage. Interestingly, the stimulated samples exhibited less visible Alizarin Red nodules compared to controls, implying that mechanical stimulation may affect the morphology and distribution of calcium aggregates, nonetheless, the overall staining was higher in the stimulated samples. This might indicate that although concentrated spots of mineralization can not be found, a more uniform mineralization takes place.

Incorporating growth parameters as inputs into our model, we attempted to fit the model in accordance with the hypertrophic data obtained from the monolayer cultures. This approach is consistent with methodologies employed in similar studies, where modeling has been used to understand the mechanobiological responses of chondrocytes.9,10,29 The finite element model, as described, provides an exploratory framework for analyzing the effects of mechanical stimulation on cell hypertrophy, offering a more comprehensive understanding of the underlying mechanisms, for example the change in size of the chondrocyte may affect the front of diffusion vesicles that may act as nucleation sites, furthermore the peak stresses that were calculated may activate mechanisms that accelerate mineralization. This model fits the hypertrophy as a function of the osteogenic index, nevertheless, several simplifications have been made, namely, a linear isotropic model has been implemented, so the poroviscoelastic fibrillar30 nature of cartilage is heavily simplified, nonetheless we attempt to use this phenomenological model to further explore how the osteogenic index can be used to predict changes at a cellular level.

The SEM and EDS results reinforce the hypothesis that mechanical stimulation positively influences mineralization. This provides a visual confirmation of the mineralization. In both stimulated and control samples, no significant effect was found on proliferation from day 6 onward. This phenomenon might be related to the differentiation stage of the cells, as suggested by previous studies.31,32 The most notable effect regarding the stimulation was the initial change in morphology at day 6, after stimulation, due to substrate deformation. In Fig. 10, the collagen fibers can be seen after stimulation, a clear alignment with the direction of loading explains the initial morphological changes, and cells orientation.

Alignment of collagen substrate along the loading axis for stimulated sample.
Fig. 10 Alignment of collagen substrate along the loading axis for stimulated sample.

The results in GAGs production are in accordance with the work of (33; R. J.34–38), where a tensile strain with a frequency of 0.05Hz, decreased proteoglycan production, this fact has been found as a hallmark of mineralization, since proteoglycans containing collagen binding sites may affect mineralization by occupying nucleation sites, and its affinity for Ca2+ might compete with phosphate groups. On the other hand, faster frequencies have linked to increase proteoglycan production.17This means that the threshold for which frequencies start to improve proteoglycan production should be more studied, with a focus on mineralization.

The study adds to the growing body of evidence supporting the role of mechanical stimulation in chondrocyte biology and endochondral ossification. The observed correlation between mechanical strain and accelerated mineralization opens up new avenues for exploring therapeutic strategies in conditions related to abnormal endochondral growth and cartilage repair and studying other stimulation regimes. Future research should focus on further elucidating the molecular pathways involved in this process, potentially leading to novel approaches in tissue engineering and regenerative medicine.

5

5 Conclusions

This study provides quantitative evidence that integrating a mechanical stimulation regime with an optimized supplementation protocol significantly accelarates ECM mineralization in ATDC5 chondrogenic cells. Specifically, applying dynamic tensile stimulation at 12 % strain, 0.05 Hz for 1 h per day resulted in a 32 % increase in Alizarin Red staining intensity compared to non-stimulated controls (P < 0.001), confirming an accelerated mineralization process. Collagen fiber alignment in mechanically stimulated samples suggests a direct response of the ECM to applied tensile forces, potentially optimizing the structural properties of engineered cartilage tissues.

These findings highlight the synergistic effect of mechanical stimulation and biochemical cues in promoting matrix mineralization. This approach holds strong potential for enhancing tissue engineering strategies targeting skeletal development and repair. Future research should investigate the mechanotransduction pathways involved, explore alternative mechanical loading conditions, and refine modeling approaches to predict cell behavior under various stimulation regimes. Such advancements could lead to more effective therapeutic strategies for cartilage repair and disorders related to abnormal endochondral ossification.

CRediT authorship contribution statement

Diego Quexada-Rodríguez: Conceptualization, Data curation, Formal analysis, Investigation, Methodology, Software, Validation, Writing – original draft. Taha Messelmani: Methodology, Resources. Rachid Jellali: Methodology, Writing – review & editing, Resources. Anne Le Goff: Methodology, Writing – review & editing, Resources. Marie-Christine Ho Ba Tho: Project administration, Funding acquisition, Resources, Supervision. Diego Garzón-Alvarado: Project administration, Supervision. Olfa Trabelsi: Project administration, Funding acquisition, Resources, Supervision, Data curation, Writing – review & editing.

Ethics statement

As the author of this manuscript submitted to Journal of Orthopaedics, I affirm that my research adheres to the highest ethical standards in scientific investigation, data integrity, and publication practices. All data, methodologies, and results presented in this work have been accurately reported and analyzed without fabrication, falsification, or inappropriate data manipulation. Any modifications or processing of data are transparently described to ensure reproducibility and clarity. This manuscript is my original work and does not contain any plagiarized content. Proper citations and references have been provided for all sources, including prior research, data, and software used in the study.

I confirm that the authors and I, are the sole authors of this manuscript and that all contributions, including conceptualization, methodology, analysis, and writing, have been carried out by me. No undeserving authorship has been granted, and any collaborators or contributors have been appropriately acknowledged where applicable. I declare that there are no conflicts of interest, financial or otherwise, that could have influenced the design, execution, or reporting of this study. Any potential conflicts have been disclosed in the manuscript where necessary. Any sources of funding, institutional support, or grants that contributed to this research have been properly acknowledged. No undisclosed funding or financial support has influenced the findings presented.

If applicable, all experimental procedures involving human subjects, animals, or sensitive biological materials have been conducted in accordance with ethical guidelines established by relevant institutional review boards (IRBs) or ethics committees. Necessary approvals and informed consent statements have been obtained and documented. I have reviewed and complied with all ethical and submission guidelines outlined by Journal of Orthopaedics. Any necessary disclosures, supplementary materials, or supporting data have been provided to meet the journal's requirements. By submitting this manuscript, I affirm my commitment to ethical research practices and uphold the integrity of scientific publication.

Guardian patient consent statement

Regarding the article entitled: ∗Mechanical Stimulation in 2D: A Potent Accelerator of Matrix Mineralization in ATDC5 Chondrogenic cells∗, submitted to the Journal of Orthopedics, we wish to clarify the following regarding patient/guardian consent:

The present study did not involve any prospective data collection from human participants or identifiable personal information. All data utilized in this research were obtained through in vitro experiments and retrospective analysis of previously published, anonymized sources, computational simulations, or publicly available datasets. No patient recruitment, direct intervention, or new imaging was conducted as part of this work.

As such, the requirement for informed consent from patients or legal guardians was waived. This study complies with ethical standards concerning the use of retrospective and simulation-based research data.

Funding statement

This research was fully funded by the cotutelle PhD program established between Université de Technologie de Compiègne (France) and Universidad Nacional de Colombia (Colombia). The funding supported the collaborative research, mobility, and resources necessary for conducting this study as part of the doctoral training framework.

References

  1. , et al . Tissue Engineering in Growth Plate Cartilage Regeneration : Mechanisms to Therapeutic Strategies. 2023
    [Google Scholar]
  2. , et al . Cellular hypertrophy and calcification of embryonal carcinoma-derived chondrogenic cell line ATDC5 in vitro. J Bone Miner Res. 1997;12(8):1174-1188.
    [Google Scholar]
  3. , et al . Chondrogenic ATDC5 cells: an optimised model for rapid and physiological matrix mineralisation. Int J Mol Med. 2012;30(5):1187-1193.
    [Google Scholar]
  4. , , , . Computer model of endochondral growth and ossification in long bones: biological and mechanobiological influences. J Orthop Res. 1999;17(5):646-653.
    [Google Scholar]
  5. , et al . Phosphate regulates chondrogenesis in a biphasic and maturation-dependent manner. Differentiation. 2017;95(1):54-62.
    [Google Scholar]
  6. , et al . A computed microtomography method for understanding epiphyseal growth plate fusion. Front Mater. 2018;4(January)
    [Google Scholar]
  7. , et al . Calcium signaling of primary chondrocytes and ATDC5 chondrogenic cells under osmotic stress and mechanical stimulation. J Biomech. 2022;145:1-18.
    [Google Scholar]
  8. , et al . Double-edged role of mechanical stimuli and underlying mechanisms in cartilage tissue engineering. Front Bioeng Biotechnol. 2023;11(November):1-26.
    [Google Scholar]
  9. , , , , . Lithium chloride - induced primary cilia recovery enhances biosynthetic response of chondrocytes to mechanical stimulation. Biomech Model Mechanobiol. 2022;21(2):605-614.
    [Google Scholar]
  10. , , , . Effects of Mechanical Stimulation on Metabolomic Profiles of SW1353 Chondrocytes : Shear and Compression. 2022
    [Google Scholar]
  11. , , . Mechanical stresses and endochondral ossification in the chondroepiphysis. J Orthop Res. 1988;6(1):148-154.
    [Google Scholar]
  12. , et al . Mechanical stress protects against chondrocyte pyroptosis through TGF-β1-mediated activation of smad2/3 and inhibition of the NF-ΚB signaling pathway in an osteoarthritis model. Biomed Pharmacother. 2023;159(December 2022)
    [Google Scholar]
  13. , et al . Mechanical stimulation is a key Component in the development of pericellular matrix around human chondrocytes. Osteoarthr Cartil. 2021;29(2021)
    [Google Scholar]
  14. , et al . Research Progress of Different Mechanical Stimulation Regulating Chondrocytes Metabolism. 2020
    [Google Scholar]
  15. , et al . A 3D printed mimetic composite for the treatment of growth plate injuries in a rabbit model. NPJ Regen Med. 2022;7(1)
    [Google Scholar]
  16. , , , , . Mechanical Stimulation of Growth Plate Chondrocytes : Previous Approaches and Future Directions. 2018
    [Google Scholar]
  17. , et al . The effect of mechanical loading on the metabolism of growth plate chondrocytes. Ann Biomed Eng. 2008;36(5):793-800.
    [Google Scholar]
  18. , et al . The effect of mechanical stretch stress on the differentiation and apoptosis of human growth plate chondrocytes. In Vitro Cell Dev Biol Anim. 2017;53(2):141-148.
    [Google Scholar]
  19. , , , , . Molecular analysis of chondrocytes cultured in agarose in response to dynamic compression. BMC Biotechnol. 2008;8:1-10.
    [Google Scholar]
  20. , , , , . Effects of cyclic tensile strain on chondrocyte metabolism: a systematic review. PLoS One. 2015;10(3):1-25.
    [Google Scholar]
  21. , , . Cartilage calcification. 2012:e275-e281.
    [Google Scholar]
  22. , , , . Changes in proteoglycan aggregates during cartilage mineralization. Calcif Tissue Int. 1987;41(4):228-236.
    [Google Scholar]
  23. , et al . 基因的改变NIH public access. Eur Respir J. 2008;31(5):949-956.
    [Google Scholar]
  24. , , , . Effect of growth plate geometry and growth direction on prediction of proximal femoral morphology. J Biomech. 2016;49(9):1613-1619.
    [Google Scholar]
  25. , , , . Regional variations in growth plate chondrocyte deformation as predicted by three-dimensional multi-scale simulations. PLoS One. 2015;10(4)
    [Google Scholar]
  26. , , . Heterogeneous nanostructural and nanoelastic properties of pericellular and interterritorial matrices of chondrocytes by atomic force microscopy. J Struct Biol. 2004;145(3):196-204.
    [Google Scholar]
  27. , et al . Fluid shear stress-induced exosomes from liver cancer cells promote activation of cancer-associated fibroblasts via IGF2-PI3K Axis. Front Biosci - Landmark. 2022;27(3)
    [Google Scholar]
  28. , et al . Chondrocyte burst promotes space for mineral expansion. Integr Biol (United Kingdom). 2018;10(1):57-66.
    [Google Scholar]
  29. , , , , . Exploring the impact of mechanical stimuli on growth plate morphology and trabecular adaptation: A finite element approach. Journal of Orthopaedics. 2025;63:228-237.
    [Google Scholar]
  30. , , , , . A fibril-reinforced poroviscoelastic swelling model for articular cartilage. J Biomech. 2005;38(6):1195-1204.
    [Google Scholar]
  31. , , , . Meis2 Controls Skeletal Formation in the Hyoid Region. 2022:1-19.
    [Google Scholar]
  32. , , , et al . Loss of Sprouty produces a ciliopathic skeletal phenotype in mice through upregulation of Hedgehog signaling. Journal of Bone and Mineral Research. 2021;36(11):2258-2274.
    [Google Scholar]
  33. , et al . Cyclic tensile stress exerts antiinflammatory actions on chondrocytes by inhibiting inducible nitric oxide synthase. J Immunol (Baltimore, Md. : 1950). 1999;163(4):2187-2192.
    [Google Scholar]
  34. , et al . Interaction of strain and interleukin-1 in articular cartilage: effects on proteoglycan synthesis in chondrocytes. Int J Oral Maxillofac Surg. 2000;29(5):389-394.
    [Google Scholar]
  35. , , , , . Localizing the osseous boundaries of micro-osteoperforations. Am J Orthod Dentofacial Orthop. 2019;155(6):779-790.
    [Google Scholar]
  36. , . Optimization of Finite Dimensional Structures Optimization Of Finite Dimensional Structures. 2016
    [Google Scholar]
  37. , , , . 7 APOS Trends in Orthodontics Clinical Guide To Accelerated Orthodontics. 2017
    [Google Scholar]
  38. , , , , . Cyclic tensile strain acts as an antagonist of IL-1 beta actions in chondrocytes. J Immunol (Baltimore, Md. : 1950). 2000;165(1):453-460.
    [Google Scholar]
Show Sections